Suzuki LT 500 Porting & Head Mods
Suzuki LT 500 Porting & Head Mods
DRI has spent 1000's of hours doing R&D on 2-stroke Engines/Cylinders/Port types designs to MAXIMIZE PERFORMANCE and RELIABILITY . There are no quick read manuals to explain the complexity of 2-Stroke porting.
Data must be gathered-recorded and analyzed, to help properly design cylinders that not only perform properly but give the reliability and consistency expected from DR/PTR Cylinder.
DRI has proven port designs for ALL Applications; Desert, MX, XC, Off-Road, Sand Dunes and Sand Drags, Ice Racing, Enduros, Serious Trail Riding, etc. You name it DR has built cylinders that have raced it.
DRIs have won more Pro ATV Races and Pro ATV Championships than any other company in the world over the last 4 decades. DRI has spent 100's of hours doing R&D on 2-stroke port cylinder port designs
All port work is 100% Guaranteed
All PTR cylinders have port timing degreed in and all port dimensions are blued and scribed for MAXIMUM consistency
PTR Porting is a labor service modification
All PTR porting is performed in house. By Loren Duncan
All PTR ported cylinders and individually serial numbered. With data recorded in a DRI data file, for future reference
For Maximum performance and reliability with a PTR ported cylinder it is imperative the piston, rings and cylinder bore are kept good conditions.
Piston clearance should ALWAYS be kept under .005 of an inch * Contact DRI for more detailsQuality Cylinder Boring and Proper Port Chamfering is critical to the performance and reliability of your cylinder.
When these services are required for your engine, be sure that they are performed by DRI or a highly trained technicianCall DRI for one on one consultation about, your machine, your riding and your needs. #619.258.6306
Paul Turner Racing Products are a proprietary brand of Duncan Racing International, Inc.Suzuki LT 500R Porting Type Options
NATIONAL Midrange (midrange)
ELIMINATOR (midrange/top end combo)
All PTR porting types same price.
PTR Porting and Stock Head Rechambering $650.00
PTR Porting (use Powerhead at additional cost) $595.00
Powerhead with headstay $299.95
*If customer already has a Powerhead, they may purchase a matched dome(for ported cylinder)for $55.00 and use their existing Powerhead outer shell.
*Cylinder Boring and Piston are not included in price. DRI can bore cylinders and supply new piston at additional cost
Models
Fits:
Suzuki LT 500R
Cores Required
Cylinders and Head(if stock head modification is desired)
*Customer must send in their cylinder for PTR Port modification or purchase new cylinders direct from DRI
Power Emphasis
NATIONALMidrange:Good low end throttle response, excellant midrange, good top end,
likes to pull a taller gear
Best Carburetor:39mm PWK Keihin
Best PTR Pipe: PTR Suz 500
ELIMINATOR:Power emphasis; good Bottom end Strong Midrange Pull, Very Good Top End.
Strongest Power at 3/4 throttle
Best Carburetor:39mm PWK Keihin
Best PTR Pipe: PTR Suz 500
Power Gain
20% over stock, peak
Reliability Rating
With proper maintenance, PTR Porting is 85% reliable as stock
Application Recommendation
NATIONAL: Good All-Around, Trails, Woods, Sand Dune, Does it all
Very Versitale
ELIMINATOR:Good for Drag Racing Sand, Dirt or Asphalt, Hill Racing, High Speed trail Riding
Special Notes
Paul Turner Racing Products are a proprietary brand of Duncan Racing International, Inc.